Gage Tolerance Calculator
Use this utility to calculate the suggested Gage Tolerance and Go / No-Go gage dimensions.
Parameters
Calculation Results
-
-
-
-
| Diameter Range Inches (Above-Including) |
XX | X | Y | Z | ZZ |
|---|---|---|---|---|---|
| 0.010 - 0.825 | 0.000020 | 0.000040 | 0.000070 | 0.000100 | 0.000200 |
| 0.825 - 1.510 | 0.000030 | 0.000060 | 0.000090 | 0.000120 | 0.000240 |
| 1.510 - 2.510 | 0.000040 | 0.000080 | 0.000120 | 0.000160 | 0.000320 |
| 2.510 - 4.510 | 0.000050 | 0.000100 | 0.000150 | 0.000200 | 0.000400 |
| 4.510 - 6.510 | 0.000065 | 0.000130 | 0.000190 | 0.000250 | 0.000500 |
| 6.510 - 9.010 | 0.000080 | 0.000160 | 0.000240 | 0.000320 | 0.000640 |
| 9.010 - 12.010 | 0.000100 | 0.000200 | 0.000300 | 0.000400 | 0.000800 |
| Diameter Range Millimeters (Above-Including) |
XX | X | Y | Z | ZZ |
|---|---|---|---|---|---|
| 0.254 - 20.96 | 0.00051 | 0.00102 | 0.00178 | 0.00254 | 0.00508 |
| 20.96 - 38.35 | 0.00076 | 0.00152 | 0.00229 | 0.00305 | 0.00610 |
| 38.35 - 63.75 | 0.00102 | 0.00203 | 0.00305 | 0.00406 | 0.00813 |
| 63.75 - 114.55 | 0.00127 | 0.00254 | 0.00381 | 0.00508 | 0.01016 |
| 114.55- 165.35 | 0.00165 | 0.00330 | 0.00483 | 0.00635 | 0.01270 |
| 165.35 - 228.85 | 0.00203 | 0.00406 | 0.00610 | 0.00813 | 0.01626 |
| 228.85 - 305.05 | 0.00254 | 0.00508 | 0.00762 | 0.01016 | 0.02032 |
*Diameter Tolerance Chart Reference (ANSI/ASME B89.1.5).
*Parameters and results are rounded to 8 decimal places.
*Suggested gage tolerance is calculated using the 10% product tolerance rule.